Porous Metal Products
Sinterpore® Multi Layered Sintered (MLS) Wire Cloths
SinterPore® Multi-Layered Sintered (MLS) media is constructed of multiple layers of stainless wire mesh and is designed for precise, controlled porosity, uniform pore sizes, and distributions. SinterPore® MLS laminates are permanently bonded under precise diffusion bonding (metal sintering) conditions yielding robust monolithic materials used in a wide variety of engineering applications ranging from industrial filtration to aerospace transpiration cooling.
Standard Products And Most Common Uses Include:
- Standard 2- and 3-layer SinterPore® fluidizing laminates with customer-specific permeability flow rates that are often used in bulk powder handling.
- Standard 5-layer SinterPore® filter plates are used for pharmaceutical, polymer, and liquid and gas filtration.
Applications:
- Oil and Gas
- Pharmaceutical
- Aerospace
- Polymer
- Chemical Process
- Bulk Powder Handling (fluidization)
- Industrial Filtration
Features And Benefits:
- Heat and wear resistance
- Cleanability and reusability
- Fixed Pore Geometry
- Robust Non-Compressible Media
Specifications:
- Standard Sheet Sizes: 18”x48”, 24”x48”. Custom sizes available upon request. Maximum laminate size without welding is 24”x60” (larger sheets available with welds, maximum panel width with welds 120”).
- Standard Alloys: 304, 304L, 316, 316L, Alloy20 (also available in Inconel 600 and 625, Monel, and Hastalloy upon request).
SinterPore® Lo-Flo Media
SINGLE LAYER FILTER
NOMINAL MICRON |
MESH FILTER |
WEAVE TYPE |
THICKNESS
|
PERMEABILITYL/M² X SEC. (DP= 2 MBAR) |
---|---|---|---|---|
2 | 325x2300 | Twill Dutch Weave | 0.0035" | 180 |
5 | 200x1400 | Twill Dutch Weave | 0.0055" | 220 |
10 | 165x1400 | Twill Dutch Weave | 0.0055" | 420 |
20 | 165x800 | Board Mesh Twill Dutch Weave | 0.0063" | 1150 |
25 | 80x700 | Twill Dutch Weave | 0.0102" | 700 |
125 | 24x110 | Twill Dutch Weave | 0.0034" | 630 |
175 | 18x210 | Twill Dutch Weave | 0.0037" | 360 |
280 | 132x16 | Reverse Twill Dutch Weave | 0.0046" | 705 |
300 | 12x64 | Twill Dutch Weave | 0.0050" | 962 |
NOMINAL MICRON |
FILTER MESH |
WEAVE TYPE |
THICKNESS
|
OPEN AREA
|
40 | 325x325 | Plain Square | 0.0028" | 29% |
60 | 250x250 | Plain Square | 0.0032" | 37% |
80 | 200x200 | Plain Square | 0.0042" | 34% |
100 | 150x150 | Plain Square | 0.0052" | 36% |
SINTERPORE® FLUIDIZING MEDIA FILTERS
PMF PART NUMBER |
TYPE |
AIRFLOW
|
NOMINAL THICKNESS
|
---|---|---|---|
SinterPore® Low-Flo Media Filter |
|||
F - P M F - 316L - SP - LF - 05 | SP - LF - 5 | 5.0 | 0.054" |
F - P M F - 316L - SP - LF - 10 | SP - LF - 10 | 10.0 | 0.058" |
F - P M F - 316L - SP - LF - 25 | SP - LF - 25 | 25.0 | 0.061" |
SinterPore® Hi-Flo Media Filter |
|||
F - P M F - 316L - SP - HF - 50 | SP - HF - 50 | 50.0 | 0.041" |
F - P M F - 316L - SP - HF -100 | SP - HF - 100 | 100.0 | 0.044" |
F - P M F - 316L - SP - HF -200 | SP - HF - 200 | 200.0 | 0.050" |
SINTERPORE® LAMINATES
NOMINAL MICRON |
MESH FILTER |
ABSOLUTE MICRON |
THICKNESS
|
PERMEABILITY SCFM/PSI |
---|---|---|---|---|
2 | 325x2300 | 5 | 0.066" | 185 |
5 | 200x1400 | 10 | 0.066" | 375 |
10 | 165x1400 | 15 | 0.066" | 465 |
20 | 165x800 | 20 | 0.066" | 545 |
25 | 80x700 | 35 | 0.066" | 715 |
40 | 325x325 | 43 | 0.066" | 715 |
60 | 250x250 | 61 | 0.066" | 715 |
80 | 200x200 | 74 | 0.066" | 715 |
100 | 150x150 | 104 | 0.066" | 715 |
POROUS METAL FILTER SINTERPORE®
METAL MESH AND PREMIUM SAND CONTROL SCREENS SPECIFICATION SUMMARY
PMF PART NUMBER | NOMINAL MICRON RATING | NUMBER OF LAYERS | THICKNESS (INCHES) |
MAX. PORE SIZE (MICRONS) |
NOMINAL AIR PERMEABILITY | MINIMUM POROSITY | MINIMUM TENSILE STRENGTH |
---|---|---|---|---|---|---|---|
F-PMF 316L-60-SS3 | 60 | 3 | 0.072 | 82 | 410 | 58% | 550/650 |
F-PMF 316L-125-SS3 | 125 | 3 | 0.074 | 164 | 500 | 56% | 514/789 |
F-PMF 316L-175-SS4 | 175 | 4 | 0.074 | 210 | 750 | 58% | 749/854 |
F-PMF 316L-175-SS2 | 175 | 2 | 0.060 | 233 | 550 | 54% | 550/650 |
F-PMF 316L-250-SS4 | 250 | 4 | 0.074 | 286 | 850 | 58% | 681/764 |
F-PMF 316L-250-SS2 | 250 | 2 | 0.075 | 300 | 525 | 52% | 681/764 |
F-PMF 316L-400-SS4 | 400 | 4 | 0.072 | 440 | 850 | 57% | 681/764 |
Porous Metal Filters, Inc.
- 19994 Hickory Twig Way, Spring TX, 77388
- Toll Free: 866-288-2522
- Tel: 281-719-1352
- Fax: 281-719-1351
- www.pmfilter.net sales@pmfilter.net