With un-sintered material, the interlocking of the weave is the only strength factor which prevents wire movement. Sintered metal makes the geometry of the original weave permanent, and therefore the pore size and absolute filter rating of the medium permanent as well.

Standard Products and Common Uses

• Standard 2- and 3-layer SinterPore® fluidizing laminates with customer-specific permeability flow rates are often used in bulk powder handling.
• Standard 5-layer SinterPore® laminates are often used in the pharmaceutical, polymer, and liquid and gas filtration industries.

Applications:
  • Oil and Gas
  • Waste Water
  • Polymer
  • Pharmaceutical
  • Petrochemical
  • Automotive
  • Food & Beverage
Specifications:
  • Standard Sheet/Roll Sizes: Custom sizes of sheets or rolls available upon request.
  • Standard Alloys: 304, 304L, 316, 316L, Alloy20 (Also available in Inconel 600 and 625, Monel, and Hastalloy upon request.)
  • Available DFARS compliant upon request.
Features and Benefits:
  • Heat resistance
  • Pleatable and Formable
  • Fixed Pore Geometry

SINGLE LAYER FILTER

NOMINAL MICRON
MESH FILTER
WEAVE TYPE
THICKNESS +/-.003″
PERMEABILITY

L/M² X SEC. (DP= 2 MBAR)

2 325×2300 Twill Dutch Weave 0.0035″ 180
5 200×1400 Twill Dutch Weave 0.0055″ 220
10 165×1400 Twill Dutch Weave 0.0055″ 420
20 165×800 Board Mesh Twill Dutch Weave 0.0063″ 1150
25 80×700 Twill Dutch Weave 0.0102″ 700
125 24×110 Twill Dutch Weave 0.0034″ 630
175 18×210 Twill Dutch Weave 0.0037″ 360
280 132×16 Reverse Twill Dutch Weave 0.0046″ 705
300 12×64 Twill Dutch Weave 0.0050″ 962
NOMINAL MICRON
MESH FILTER
WEAVE TYPE
THICKNESS +/-.003″
OPEN AREA %
40 325×325 Plain Square 0.0028″ 29%
60 250×250 Plain Square 0.0032″ 37%
80 200×200 Plain Square 0.0042″ 34%
100 150×150 Plain Square 0.0052″ 36%